Jiangsu Shizhan Group Co.,Ltd.
Pre-sale of masks34
Add to Cart
Sanitizer Automatic Shower Soap Dispenser , Electric Hand Wash Dispenser
Product Specifications:
Automatic Shower Soap Dispenser Basic Parameters:
- Main material: ABS
- Rated voltage: 6V
- Battery type: 4 x AA batteries (not included)
- Operating temperature: 5 - 40 ℃
- Working humidity: 0% - 85% RH
| Status | Indicator Light Display |
| Power on | The light is on for one second |
| Power off | The light flashes and then goes out |
| Low battery | After induction, the lamp keeps flashing |
*When the machine is on, the machine can be shut down by touching the key.
*Tip: when the hand washing machine does not work, it will automatically enter the standby state without manual shutdown.
Usage Methods:
1. Touch the switch and turn on the automatic hand washing machine.
2. It is recommended to rinse hands until wet.
3. Stretch your hand to the induction area to obtain abundant foam.
4. It is recommended to rub your hands thoroughly.
5. After washing with clean water, dry your hands.
Notes:
1. Do not immerse the product in water or rinse it directly with water to avoid short circuit.
2. Do not tilt the bottle when installing or replacing hand sanitizer. If there is a small amount of liquid outflow is a normal phenomenon, wipe cleanly can still be used normally.
3. Do not use non-foam hand sanitizer for replacement, so as not to cause machine failure.
4. Store in a cool place away from direct sunlight or heat sources.
